Akrapovic Slip-On Line (Titanium) - BMW F87 M2 Competition Akrapovic Slip-On Line (Titanium) - BMW F87 M2 Competition Akrapovic Evolution Link Pipe Set (Titanium) was tested and developed together with Slip-On Line (Titanium). The system was developed on BMW M2 Competition (F87N) equipped with OPF/GPF, however it fits both versions (OPF and non OPF). The Evolution link pipe set upgrades the Slip-On system to the Evolution system, which consists of a slip-on rear muffler and larger Evolution link pipe tubes with a middle muffler, all designed to make the performance and workmanship of the complete system as perfect as it looks. It is crafted entirely from titanium. The whole system is designed to provide the smoothest flow. The power and torque gains of the M2 Competition with the combination of the Slip-On Line system and Evolution link pipe set are guaranteed. In-depth engineering has produced a unique sound profile, distinctly different from the stock system, yielding a deep and sporty sound with no unwanted overtones or drone and an almost racing sound, as well as a significant change to the sound with the valves in the open or closed positions. The control kit to optimize the balance between sportiness and comfort is included, together with the receiver and Sound Remote controller (or smartphone app) to regulate the valves. When installing the Akrapovič Evolution link pipe set, remapping the ECU is mandatory in order to prevent potential “check engine light” warning signals. THIS PRODUCT DOES NOT MEET EMISSION COMPLIANCE REQUIREMENTS FOR STREET OR HIGHWAY USE. TECHNICAL DATA     UNIT STOCK AKRAPOVIČ MAX GAIN maximum power kW 302.4 / 5550 rpm 310.4 / 6850 rpm + 11.2 / 4800 rpm   HP (m) 411.1 / 5550 rpm 422.0 / 6850 rpm + 15.2 / 4800 rpm   HP (i) 405.5 / 5550 rpm 416.2 / 6850 rpm + 15.0 / 4800 rpm maximum torque Nm 570.7 / 2850 rpm 582.6 / 2900 rpm + 23.8 / 4650 rpm   lb-ft 420.9 / 2850 rpm 429.7 / 2900 rpm + 17.6 / 4650 rpm weight kg 14.6 7.5 - 7.2   lb 32.2 16.4 - 15.8   %     - 49.0 noise dB 83 / 3750 rpm 93 / 3750 rpm 10 installation time min   90   ecu remapping Yes: For perfect performance, throttle response and durability, special developed mapping has to be used.    

Akrapovic Slip-On Line (Titanium) - BMW F87 M2 Competition

Code: E-BM-T-5
$4,785.00
Add to Wishlist Add to Compare
  • Fast Dispatch on In Stock Items

  • 100% Original & Quality Guarantee

  • Free Customer Support

Evolution Link Pipe Set (Titanium) was tested and developed together with Slip-On Line (Titanium).


The system was developed on BMW M2 Competition (F87N) equipped with OPF/GPF, however it fits both versions (OPF and non OPF).

The Evolution link pipe set upgrades the Slip-On system to the Evolution system, which consists of a slip-on rear muffler and larger Evolution link pipe tubes with a middle muffler, all designed to make the performance and workmanship of the complete system as perfect as it looks. It is crafted entirely from titanium. The whole system is designed to provide the smoothest flow. The power and torque gains of the M2 Competition with the combination of the Slip-On Line system and Evolution link pipe set are guaranteed. In-depth engineering has produced a unique sound profile, distinctly different from the stock system, yielding a deep and sporty sound with no unwanted overtones or drone and an almost racing sound, as well as a significant change to the sound with the valves in the open or closed positions.

The control kit to optimize the balance between sportiness and comfort is included, together with the receiver and Sound Remote controller (or smartphone app) to regulate the valves.

When installing the Akrapovič Evolution link pipe set, remapping the ECU is mandatory in order to prevent potential “check engine light” warning signals.

THIS PRODUCT DOES NOT MEET EMISSION COMPLIANCE REQUIREMENTS FOR STREET OR HIGHWAY USE.

TECHNICAL DATA

 
  UNIT STOCK AKRAPOVIČ MAX GAIN
maximum power kW 302.4 / 5550 rpm 310.4 / 6850 rpm + 11.2 / 4800 rpm
  HP (m) 411.1 / 5550 rpm 422.0 / 6850 rpm + 15.2 / 4800 rpm
  HP (i) 405.5 / 5550 rpm 416.2 / 6850 rpm + 15.0 / 4800 rpm
maximum torque Nm 570.7 / 2850 rpm 582.6 / 2900 rpm + 23.8 / 4650 rpm
  lb-ft 420.9 / 2850 rpm 429.7 / 2900 rpm + 17.6 / 4650 rpm
weight kg 14.6 7.5 - 7.2
  lb 32.2 16.4 - 15.8
  %     - 49.0
noise dB 83 / 3750 rpm 93 / 3750 rpm 10
installation time min   90  
ecu remapping Yes: For perfect performance, throttle response and durability, special developed mapping has to be used.

 

 

Evolution Link Pipe Set (Titanium) was tested and developed together with Slip-On Line (Titanium).


The system was developed on BMW M2 Competition (F87N) equipped with OPF/GPF, however it fits both versions (OPF and non OPF).

The Evolution link pipe set upgrades the Slip-On system to the Evolution system, which consists of a slip-on rear muffler and larger Evolution link pipe tubes with a middle muffler, all designed to make the performance and workmanship of the complete system as perfect as it looks. It is crafted entirely from titanium. The whole system is designed to provide the smoothest flow. The power and torque gains of the M2 Competition with the combination of the Slip-On Line system and Evolution link pipe set are guaranteed. In-depth engineering has produced a unique sound profile, distinctly different from the stock system, yielding a deep and sporty sound with no unwanted overtones or drone and an almost racing sound, as well as a significant change to the sound with the valves in the open or closed positions.

The control kit to optimize the balance between sportiness and comfort is included, together with the receiver and Sound Remote controller (or smartphone app) to regulate the valves.

When installing the Akrapovič Evolution link pipe set, remapping the ECU is mandatory in order to prevent potential “check engine light” warning signals.

THIS PRODUCT DOES NOT MEET EMISSION COMPLIANCE REQUIREMENTS FOR STREET OR HIGHWAY USE.

TECHNICAL DATA

 
  UNIT STOCK AKRAPOVIČ MAX GAIN
maximum power kW 302.4 / 5550 rpm 310.4 / 6850 rpm + 11.2 / 4800 rpm
  HP (m) 411.1 / 5550 rpm 422.0 / 6850 rpm + 15.2 / 4800 rpm
  HP (i) 405.5 / 5550 rpm 416.2 / 6850 rpm + 15.0 / 4800 rpm
maximum torque Nm 570.7 / 2850 rpm 582.6 / 2900 rpm + 23.8 / 4650 rpm
  lb-ft 420.9 / 2850 rpm 429.7 / 2900 rpm + 17.6 / 4650 rpm
weight kg 14.6 7.5 - 7.2
  lb 32.2 16.4 - 15.8
  %     - 49.0
noise dB 83 / 3750 rpm 93 / 3750 rpm 10
installation time min   90  
ecu remapping Yes: For perfect performance, throttle response and durability, special developed mapping has to be used.

 

 

Euro Kustoms - Shipping, Returns & Refunds Policy

Last updated: 5 October 2025

Business Name: Euro Automotive Group Pty Ltd (trading as Euro Kustoms)
ABN: 98 629 757 035
Business Address: 8 Sir Joseph Banks Street, Botany NSW 2019, Australia
Email: info@eurokustoms.com.au
Phone: (+61) 451 513 339


1. Overview

Euro Kustoms supplies automotive parts and accessories and ships items Australia-wide via third-party courier services. This policy sets out our shipping practices, returns, refunds, warranties, and your rights under the Australian Consumer Law (ACL).

Due to the size, weight, or specialised nature of certain products, freight insurance is not always included. Unless additional insurance is arranged, goods are shipped at the buyer’s risk to the extent permitted by law.


2. Orders, Buyer Responsibilities & Transit Risk

  • Buyers must provide accurate delivery details and a valid contact number at checkout.

  • Items over 25kg or longer than 1 metre cannot be delivered to PO Boxes.

  • Title and risk pass to the buyer upon dispatch, except where ACL applies.

  • All items are inspected and packaged prior to dispatch.

  • Euro Kustoms is not liable for loss or damage in transit unless additional freight insurance has been purchased.

  • Optional freight insurance may be available and must be requested within 24 hours of purchase.


3. Stock Availability & Supply

  • Stock availability is not guaranteed.

  • Some products are custom-made, made-to-order, or imported.

  • Estimated dispatch and delivery times are indicative only and may change without notice.

  • Euro Kustoms is not responsible for delays caused by suppliers, manufacturers, importers, or couriers.


4. Dispatch & Delivery

  • Orders are generally dispatched within 1–5 business days after payment clearance, unless otherwise stated.

  • Delivery timeframes typically range from 7–10 business days, depending on location and courier.

  • Tracking details are supplied for all shipments.

  • Deliveries occur during standard business hours (weekdays only, excluding public holidays).

  • Failed deliveries, incorrect addresses, or incomplete details may result in delays, returns, or redelivery fees.


5. Australian Consumer Law (ACL) Guarantees

Our goods come with guarantees that cannot be excluded under the ACL.

  • For major failures, you are entitled to a refund, replacement, or repair.

  • For minor failures, you are entitled to a repair or replacement.

  • This policy does not limit or exclude any non-excludable rights under ACL.


6. Faulty Goods, Warranty & Damage Claims

  • Claims must be lodged within 7 days of delivery, including order number and supporting evidence.

  • Euro Kustoms may assess the product and/or liaise with the manufacturer or importer.

  • Remedies may include repair, replacement, or refund (refunds are provided only where no other remedy is reasonably available).

Important conditions:

  • Warranty may be void if the product has been modified, altered, incorrectly installed, or tampered with.

  • Euro Kustoms is not liable for labour, diagnostic, fitting, or refitting costs.

  • If customer actions contributed to the issue, remedies may be reduced or refused.

  • Refunds for ACL-approved faults exclude shipping costs unless legally required.

  • If a claim is rejected, the item will be returned at the customer’s cost.

  • Storage fees of 10% of the item value per 14 days may apply after notification.


7. Change-of-Mind Returns (Discretionary)

  • May be considered & determined at Euro Kustoms’ discretion within 7 days of delivery.

  • Items must be unused, unfitted, and returned in original packaging & have a genuine reason for return.

  • A 25% restocking fee applies.

  • All return freight costs are the responsibility of the customer.

  • Refunds are processed within 5–10 business days after inspection.


8. Order Cancellations

  • Orders cancelled after placement but before dispatch or production incur a 25% restocking fee.

  • Orders already dispatched are treated as returns.


9. Freight & Return Shipping Costs

  • Shipping and handling fees are non-refundable.

  • If free shipping was included, return freight is charged at 20% of the item value.

  • Customers are responsible for ensuring returns are adequately packaged, insured, and traceable.

  • Euro Kustoms is not responsible for items lost or damaged during return transit.


10. Non-Returnable & Excluded Items

Returns are not accepted for:

  • Electrical items that have been installed or used.

  • Custom-made, special-order, clearance, or discontinued items.

  • Items marked “non-returnable”.

  • Products damaged through misuse, incorrect installation, or unauthorised modification.


11. Returns Authorisation (RMA) Process

  1. Email info@eurokustoms.com.au with:

    • Order number

    • Item(s) being returned

    • Reason for return (with photos where applicable)

  2. Await written Return Authorisation (RMA) approval and instructions.

  3. Clearly display the RMA number on the package.

  4. Returns without an RMA will be refused.


12. Road-Use & Compliance Disclaimer

Unless expressly stated otherwise, products sold by Euro Kustoms are not certified for legal road use in Australia.

The customer is solely responsible for compliance with applicable laws and regulations. Euro Kustoms accepts no liability for damages or losses, penalties, defects, or enforcement actions arising from the use of non-compliant products.


13. Limitation of Liability

To the maximum extent permitted by law:

  • Euro Kustoms excludes liability for indirect, incidental, or consequential loss, including loss of profit, loss of use, or business interruption.

  • Liability for goods is limited, at Euro Kustoms’ discretion, to repair, replacement, or refund, except where Australian Consumer Law requires otherwise.


14. Force Majeure

Euro Kustoms is not liable for any delay or failure to perform its obligations where such delay or failure is caused by events beyond our reasonable control, including but not limited to supplier delays, manufacturing shortages, shipping congestion, port delays, customs clearance issues, industrial action, natural disasters, acts of government, or failures of courier or logistics providers.


15. Installation Responsibility

Unless expressly stated otherwise, products supplied by Euro Kustoms are intended to be installed by a suitably qualified professional.

Incorrect installation, failure to follow manufacturer instructions, or use outside the intended purpose may void any warranty and limit or exclude available remedies. Euro Kustoms accepts no responsibility for damage, faults, or losses arising from improper installation.


16. Governing Law & Jurisdiction

This policy and any disputes arising from it are governed by the laws of New South Wales, Australia. You agree that the courts of New South Wales have exclusive jurisdiction.


17. Contact Information

For all enquiries relating to shipping, returns, refunds, or warranties:

Email: info@eurokustoms.com.au
Phone: (+61) 451 513 339
Address: 8 Sir Joseph Banks Street, Botany NSW 2019, Australia