Eventuri Carbon Intake System with Engine Cover - BMW X5M/X6M/XM (Gloss)
-
Fast Dispatch on In Stock Items
-
100% Original & Quality Guarantee
-
Free Customer Support
BMW F95 X5M / X6M, G09 XM
Performance Gain: 18-25hp, 15-18ft-lb with up to 30hp peak gain.
Max Flow Rates: Stock 774 CFM, Eventuri 900 CFM
Introducing our F9X X5M, G09 XM intake. This intake is the result of extensive R&D and testing to improve the flow path of the stock system. Our system is a complete redesign of the stock airboxes to reduce pressure loss while increasing the flow rate and keeping inlet temperatures low. With the stock cold air feeds at the front of the car and the turbo inlets facing the rear of the car, the airflow has to negotiate a 180-degree turn through each airbox resulting in a flow restriction. To overcome this we have introduced an additional cold air feed from the scuttle panel, which results in a more direct flow path to the turbo inlets. The additional feeds allow the intake to have a higher flow rate whilst keeping IATs low and have the additional benefit of de-restricting the sound of the turbos. With the intake openings now facing the cabin, the turbo flutter and pressure release sounds are clearly audible, elevating the driving experience to another level.
The Eventuri Difference
The F9X X5M, G09 XM Eventuri system uses our Patented Carbon Fiber Housings with our Gen 2 bespoke filters, which provide an aerodynamically efficient airflow path from the filter to the turbos. Not just another cone filter with a heat shield but a unique design that invokes the Venturi effect and maintains laminar flow conditions to reduce the drag on the turbo. You can read more about the housing design and how it works HERE.
Dyno Testing
This intake has been independently dyno-tested by MSL Performance in the UK. Tests were done back to back against the stock airbox and several runs were taken with each configuration. The car tested was without charcoal filters in the stock airboxes. The dyno results show a consistent gain throughout a large part of the RPM range which can be attributed to the turbos reaching peak boost earlier and with a lower wastegate duty cycle due to the higher efficiency of the intake system. The performance gain translates on the road to increased part throttle and full throttle response with the car pulling much more eagerly to the redline.
BMW F95 X5M / X6M, G09 XM
Performance Gain: 18-25hp, 15-18ft-lb with up to 30hp peak gain.
Max Flow Rates: Stock 774 CFM, Eventuri 900 CFM
Introducing our F9X X5M, G09 XM intake. This intake is the result of extensive R&D and testing to improve the flow path of the stock system. Our system is a complete redesign of the stock airboxes to reduce pressure loss while increasing the flow rate and keeping inlet temperatures low. With the stock cold air feeds at the front of the car and the turbo inlets facing the rear of the car, the airflow has to negotiate a 180-degree turn through each airbox resulting in a flow restriction. To overcome this we have introduced an additional cold air feed from the scuttle panel, which results in a more direct flow path to the turbo inlets. The additional feeds allow the intake to have a higher flow rate whilst keeping IATs low and have the additional benefit of de-restricting the sound of the turbos. With the intake openings now facing the cabin, the turbo flutter and pressure release sounds are clearly audible, elevating the driving experience to another level.
The Eventuri Difference
The F9X X5M, G09 XM Eventuri system uses our Patented Carbon Fiber Housings with our Gen 2 bespoke filters, which provide an aerodynamically efficient airflow path from the filter to the turbos. Not just another cone filter with a heat shield but a unique design that invokes the Venturi effect and maintains laminar flow conditions to reduce the drag on the turbo. You can read more about the housing design and how it works HERE.
Dyno Testing
This intake has been independently dyno-tested by MSL Performance in the UK. Tests were done back to back against the stock airbox and several runs were taken with each configuration. The car tested was without charcoal filters in the stock airboxes. The dyno results show a consistent gain throughout a large part of the RPM range which can be attributed to the turbos reaching peak boost earlier and with a lower wastegate duty cycle due to the higher efficiency of the intake system. The performance gain translates on the road to increased part throttle and full throttle response with the car pulling much more eagerly to the redline.
Euro Kustoms - Shipping, Returns & Refunds Policy
Last updated: 5 October 2025
Business Name: Euro Automotive Group Pty Ltd (trading as Euro Kustoms)
ABN: 98 629 757 035
Business Address: 8 Sir Joseph Banks Street, Botany NSW 2019, Australia
Email: info@eurokustoms.com.au
Phone: (+61) 451 513 339
1. Overview
Euro Kustoms supplies automotive parts and accessories and ships items Australia-wide via third-party courier services. This policy sets out our shipping practices, returns, refunds, warranties, and your rights under the Australian Consumer Law (ACL).
Due to the size, weight, or specialised nature of certain products, freight insurance is not always included. Unless additional insurance is arranged, goods are shipped at the buyer’s risk to the extent permitted by law.
2. Orders, Buyer Responsibilities & Transit Risk
-
Buyers must provide accurate delivery details and a valid contact number at checkout.
-
Items over 25kg or longer than 1 metre cannot be delivered to PO Boxes.
-
Title and risk pass to the buyer upon dispatch, except where ACL applies.
-
All items are inspected and packaged prior to dispatch.
-
Euro Kustoms is not liable for loss or damage in transit unless additional freight insurance has been purchased.
-
Optional freight insurance may be available and must be requested within 24 hours of purchase.
3. Stock Availability & Supply
-
Stock availability is not guaranteed.
-
Some products are custom-made, made-to-order, or imported.
-
Estimated dispatch and delivery times are indicative only and may change without notice.
-
Euro Kustoms is not responsible for delays caused by suppliers, manufacturers, importers, or couriers.
4. Dispatch & Delivery
-
Orders are generally dispatched within 1–5 business days after payment clearance, unless otherwise stated.
-
Delivery timeframes typically range from 7–10 business days, depending on location and courier.
-
Tracking details are supplied for all shipments.
-
Deliveries occur during standard business hours (weekdays only, excluding public holidays).
-
Failed deliveries, incorrect addresses, or incomplete details may result in delays, returns, or redelivery fees.
5. Australian Consumer Law (ACL) Guarantees
Our goods come with guarantees that cannot be excluded under the ACL.
-
For major failures, you are entitled to a refund, replacement, or repair.
-
For minor failures, you are entitled to a repair or replacement.
-
This policy does not limit or exclude any non-excludable rights under ACL.
6. Faulty Goods, Warranty & Damage Claims
-
Claims must be lodged within 7 days of delivery, including order number and supporting evidence.
-
Euro Kustoms may assess the product and/or liaise with the manufacturer or importer.
-
Remedies may include repair, replacement, or refund (refunds are provided only where no other remedy is reasonably available).
Important conditions:
-
Warranty may be void if the product has been modified, altered, incorrectly installed, or tampered with.
-
Euro Kustoms is not liable for labour, diagnostic, fitting, or refitting costs.
-
If customer actions contributed to the issue, remedies may be reduced or refused.
-
Refunds for ACL-approved faults exclude shipping costs unless legally required.
-
If a claim is rejected, the item will be returned at the customer’s cost.
-
Storage fees of 10% of the item value per 14 days may apply after notification.
7. Change-of-Mind Returns (Discretionary)
-
May be considered & determined at Euro Kustoms’ discretion within 7 days of delivery.
-
Items must be unused, unfitted, and returned in original packaging & have a genuine reason for return.
-
A 25% restocking fee applies.
-
All return freight costs are the responsibility of the customer.
-
Refunds are processed within 5–10 business days after inspection.
8. Order Cancellations
-
Orders cancelled after placement but before dispatch or production incur a 25% restocking fee.
-
Orders already dispatched are treated as returns.
9. Freight & Return Shipping Costs
-
Shipping and handling fees are non-refundable.
-
If free shipping was included, return freight is charged at 20% of the item value.
-
Customers are responsible for ensuring returns are adequately packaged, insured, and traceable.
-
Euro Kustoms is not responsible for items lost or damaged during return transit.
10. Non-Returnable & Excluded Items
Returns are not accepted for:
-
Electrical items that have been installed or used.
-
Custom-made, special-order, clearance, or discontinued items.
-
Items marked “non-returnable”.
-
Products damaged through misuse, incorrect installation, or unauthorised modification.
11. Returns Authorisation (RMA) Process
-
Email info@eurokustoms.com.au with:
-
Order number
-
Item(s) being returned
-
Reason for return (with photos where applicable)
-
-
Await written Return Authorisation (RMA) approval and instructions.
-
Clearly display the RMA number on the package.
-
Returns without an RMA will be refused.
12. Road-Use & Compliance Disclaimer
Unless expressly stated otherwise, products sold by Euro Kustoms are not certified for legal road use in Australia.
The customer is solely responsible for compliance with applicable laws and regulations. Euro Kustoms accepts no liability for damages or losses, penalties, defects, or enforcement actions arising from the use of non-compliant products.
13. Limitation of Liability
To the maximum extent permitted by law:
-
Euro Kustoms excludes liability for indirect, incidental, or consequential loss, including loss of profit, loss of use, or business interruption.
-
Liability for goods is limited, at Euro Kustoms’ discretion, to repair, replacement, or refund, except where Australian Consumer Law requires otherwise.
14. Force Majeure
Euro Kustoms is not liable for any delay or failure to perform its obligations where such delay or failure is caused by events beyond our reasonable control, including but not limited to supplier delays, manufacturing shortages, shipping congestion, port delays, customs clearance issues, industrial action, natural disasters, acts of government, or failures of courier or logistics providers.
15. Installation Responsibility
Unless expressly stated otherwise, products supplied by Euro Kustoms are intended to be installed by a suitably qualified professional.
Incorrect installation, failure to follow manufacturer instructions, or use outside the intended purpose may void any warranty and limit or exclude available remedies. Euro Kustoms accepts no responsibility for damage, faults, or losses arising from improper installation.
16. Governing Law & Jurisdiction
This policy and any disputes arising from it are governed by the laws of New South Wales, Australia. You agree that the courts of New South Wales have exclusive jurisdiction.
17. Contact Information
For all enquiries relating to shipping, returns, refunds, or warranties:
Email: info@eurokustoms.com.au
Phone: (+61) 451 513 339
Address: 8 Sir Joseph Banks Street, Botany NSW 2019, Australia