Evolve LHD 4-1 Stepped Medusa Manifolds - BMW E39 M5
-
Fast Dispatch on In Stock Items
-
100% Original & Quality Guarantee
-
Free Customer Support
FOR LEFT HAND DRIVE CARS ONLY
The largest major restriction point of the E39 M5 S62 V8 engine is the exhaust manifolds / headers.
Changing the exhaust system without changing the headers gives no gain in power. In fact, changing the header back system gives little if any power gain!
The factory items are very poorly designed and looking at them it is clear funds were saved in the department. No other M Power car has ever had headers as poorly designed as on the S62 engine.
Performance headers are already available on the market but most compromises torque below 5000rpm especially under part throttle driving. The very highlight of the S62 engine is it exceptional torque at the low to mid engine speeds.
Evolve produced an 4-1 design which not only allows for more power at the higher rpm's but also enhances the strong points of the S62 engine with almost 400 lb.ft torque (stock torque is 368 lb.ft) from 2000-5000rpm. Above 5000rpm power increased by anything from 25-40hp depending on the mechanical setup of the engine.
The Evolve 4-1 headers can be used in isolation without any other performance upgrade and give a minimum gain of 30 hp and 27 lb/ft torque.
This upgrade represents the single largest performance upgrade with more power and torque accross all RPM points which in turn allows for much improved acceleration.
Noise levels are only slightly increased with the headers alone but the engine does take on a more purposeful note. For more noise please look at our exhaust range.
Much consideration has been giving to ease of fitment. Subframe removal is not require during the installation.
In conjunction with the Evolve software and Intake system the S62 V8 will go from an average of 390 bhp / 368 lb.ft to 445 bhp / 400+ lb.ft
Overview:
- Min. +25bhp / +25 lb/ft
- 4-1 Step Design Design allowing wider power band power increase (allowing faster overall accelerating)
- Constructed in Italy from T304 Stainless Steel
Dyno Graph (Headers + Evolve Exhaust only Conversion)
HEADERS MUST BE USED IN CONJUNCTION WITH EVOLVE SPORTS CAT OR DE-CAT
FOR LEFT HAND DRIVE CARS ONLY
The largest major restriction point of the E39 M5 S62 V8 engine is the exhaust manifolds / headers.
Changing the exhaust system without changing the headers gives no gain in power. In fact, changing the header back system gives little if any power gain!
The factory items are very poorly designed and looking at them it is clear funds were saved in the department. No other M Power car has ever had headers as poorly designed as on the S62 engine.
Performance headers are already available on the market but most compromises torque below 5000rpm especially under part throttle driving. The very highlight of the S62 engine is it exceptional torque at the low to mid engine speeds.
Evolve produced an 4-1 design which not only allows for more power at the higher rpm's but also enhances the strong points of the S62 engine with almost 400 lb.ft torque (stock torque is 368 lb.ft) from 2000-5000rpm. Above 5000rpm power increased by anything from 25-40hp depending on the mechanical setup of the engine.
The Evolve 4-1 headers can be used in isolation without any other performance upgrade and give a minimum gain of 30 hp and 27 lb/ft torque.
This upgrade represents the single largest performance upgrade with more power and torque accross all RPM points which in turn allows for much improved acceleration.
Noise levels are only slightly increased with the headers alone but the engine does take on a more purposeful note. For more noise please look at our exhaust range.
Much consideration has been giving to ease of fitment. Subframe removal is not require during the installation.
In conjunction with the Evolve software and Intake system the S62 V8 will go from an average of 390 bhp / 368 lb.ft to 445 bhp / 400+ lb.ft
Overview:
- Min. +25bhp / +25 lb/ft
- 4-1 Step Design Design allowing wider power band power increase (allowing faster overall accelerating)
- Constructed in Italy from T304 Stainless Steel
Dyno Graph (Headers + Evolve Exhaust only Conversion)
HEADERS MUST BE USED IN CONJUNCTION WITH EVOLVE SPORTS CAT OR DE-CAT
Euro Kustoms - Shipping, Returns & Refunds Policy
Last updated: 5 October 2025
Business Name: Euro Automotive Group Pty Ltd (trading as Euro Kustoms)
ABN: 98 629 757 035
Business Address: 8 Sir Joseph Banks Street, Botany NSW 2019, Australia
Email: info@eurokustoms.com.au
Phone: (+61) 451 513 339
1. Overview
Euro Kustoms supplies automotive parts and accessories and ships items Australia-wide via third-party courier services. This policy sets out our shipping practices, returns, refunds, warranties, and your rights under the Australian Consumer Law (ACL).
Due to the size, weight, or specialised nature of certain products, freight insurance is not always included. Unless additional insurance is arranged, goods are shipped at the buyer’s risk to the extent permitted by law.
2. Orders, Buyer Responsibilities & Transit Risk
-
Buyers must provide accurate delivery details and a valid contact number at checkout.
-
Items over 25kg or longer than 1 metre cannot be delivered to PO Boxes.
-
Title and risk pass to the buyer upon dispatch, except where ACL applies.
-
All items are inspected and packaged prior to dispatch.
-
Euro Kustoms is not liable for loss or damage in transit unless additional freight insurance has been purchased.
-
Optional freight insurance may be available and must be requested within 24 hours of purchase.
3. Stock Availability & Supply
-
Stock availability is not guaranteed.
-
Some products are custom-made, made-to-order, or imported.
-
Estimated dispatch and delivery times are indicative only and may change without notice.
-
Euro Kustoms is not responsible for delays caused by suppliers, manufacturers, importers, or couriers.
4. Dispatch & Delivery
-
Orders are generally dispatched within 1–5 business days after payment clearance, unless otherwise stated.
-
Delivery timeframes typically range from 7–10 business days, depending on location and courier.
-
Tracking details are supplied for all shipments.
-
Deliveries occur during standard business hours (weekdays only, excluding public holidays).
-
Failed deliveries, incorrect addresses, or incomplete details may result in delays, returns, or redelivery fees.
5. Australian Consumer Law (ACL) Guarantees
Our goods come with guarantees that cannot be excluded under the ACL.
-
For major failures, you are entitled to a refund, replacement, or repair.
-
For minor failures, you are entitled to a repair or replacement.
-
This policy does not limit or exclude any non-excludable rights under ACL.
6. Faulty Goods, Warranty & Damage Claims
-
Claims must be lodged within 7 days of delivery, including order number and supporting evidence.
-
Euro Kustoms may assess the product and/or liaise with the manufacturer or importer.
-
Remedies may include repair, replacement, or refund (refunds are provided only where no other remedy is reasonably available).
Important conditions:
-
Warranty may be void if the product has been modified, altered, incorrectly installed, or tampered with.
-
Euro Kustoms is not liable for labour, diagnostic, fitting, or refitting costs.
-
If customer actions contributed to the issue, remedies may be reduced or refused.
-
Refunds for ACL-approved faults exclude shipping costs unless legally required.
-
If a claim is rejected, the item will be returned at the customer’s cost.
-
Storage fees of 10% of the item value per 14 days may apply after notification.
7. Change-of-Mind Returns (Discretionary)
-
May be considered & determined at Euro Kustoms’ discretion within 7 days of delivery.
-
Items must be unused, unfitted, and returned in original packaging & have a genuine reason for return.
-
A 25% restocking fee applies.
-
All return freight costs are the responsibility of the customer.
-
Refunds are processed within 5–10 business days after inspection.
8. Order Cancellations
-
Orders cancelled after placement but before dispatch or production incur a 25% restocking fee.
-
Orders already dispatched are treated as returns.
9. Freight & Return Shipping Costs
-
Shipping and handling fees are non-refundable.
-
If free shipping was included, return freight is charged at 20% of the item value.
-
Customers are responsible for ensuring returns are adequately packaged, insured, and traceable.
-
Euro Kustoms is not responsible for items lost or damaged during return transit.
10. Non-Returnable & Excluded Items
Returns are not accepted for:
-
Electrical items that have been installed or used.
-
Custom-made, special-order, clearance, or discontinued items.
-
Items marked “non-returnable”.
-
Products damaged through misuse, incorrect installation, or unauthorised modification.
11. Returns Authorisation (RMA) Process
-
Email info@eurokustoms.com.au with:
-
Order number
-
Item(s) being returned
-
Reason for return (with photos where applicable)
-
-
Await written Return Authorisation (RMA) approval and instructions.
-
Clearly display the RMA number on the package.
-
Returns without an RMA will be refused.
12. Road-Use & Compliance Disclaimer
Unless expressly stated otherwise, products sold by Euro Kustoms are not certified for legal road use in Australia.
The customer is solely responsible for compliance with applicable laws and regulations. Euro Kustoms accepts no liability for damages or losses, penalties, defects, or enforcement actions arising from the use of non-compliant products.
13. Limitation of Liability
To the maximum extent permitted by law:
-
Euro Kustoms excludes liability for indirect, incidental, or consequential loss, including loss of profit, loss of use, or business interruption.
-
Liability for goods is limited, at Euro Kustoms’ discretion, to repair, replacement, or refund, except where Australian Consumer Law requires otherwise.
14. Force Majeure
Euro Kustoms is not liable for any delay or failure to perform its obligations where such delay or failure is caused by events beyond our reasonable control, including but not limited to supplier delays, manufacturing shortages, shipping congestion, port delays, customs clearance issues, industrial action, natural disasters, acts of government, or failures of courier or logistics providers.
15. Installation Responsibility
Unless expressly stated otherwise, products supplied by Euro Kustoms are intended to be installed by a suitably qualified professional.
Incorrect installation, failure to follow manufacturer instructions, or use outside the intended purpose may void any warranty and limit or exclude available remedies. Euro Kustoms accepts no responsibility for damage, faults, or losses arising from improper installation.
16. Governing Law & Jurisdiction
This policy and any disputes arising from it are governed by the laws of New South Wales, Australia. You agree that the courts of New South Wales have exclusive jurisdiction.
17. Contact Information
For all enquiries relating to shipping, returns, refunds, or warranties:
Email: info@eurokustoms.com.au
Phone: (+61) 451 513 339
Address: 8 Sir Joseph Banks Street, Botany NSW 2019, Australia