Racingline DQ250 6 Speed DSG Oil Cooler - MQB Racingline DQ250 6 Speed DSG Oil Cooler - MQB Racingline Racingline Performance DSG Oil Cooler System for MQB DQ250 (6 Speed Only) Part number: VWR29G7250 It’s not just your engine oil that you need to protect. Your DSG gearbox is susceptible to overheating. And the higher your power, the harder you drive, the more important it is to protect it. Under hard driving, the factory DSG oil/water cooler is easily overwhelmed. Problems start to occur when oil cannot dissipate its collected heat fast enough and the oil begins to thin and degrade – losing its lubrication properties. When this happens, the DSG will protect itself and begin to lower the torque, increase shift times and in extreme circumstances even loose gear selection. The RacingLine kit solves this problem: by adding in an additional air/oil cooler positioned right in the airflow at the front of the car, oil temperatures are reduced by around 15  – 20   degrees centigrade (of course dependant on how the car is being used, ambient temps and state of tune). The kit uses a clever design which retains the factory oil/water cooling and adds to it with the thermostatically-controlled front-mounted cooler – doubling up your cooling capability when it’s needed with less heat transfer into the water system. Only when the oil exceeds normal temperatures, the thermostat opens. Oil temperature then drops significantly as it is pumped through the densely packed fins of the 10-row cooler’s large surface area mounted right in the cool airflow. What’s included in the kit Oil cooler mounting brackets AN10 210 series Nylon braided feed and return line Billet CNC thermostatic adaptor block Replacement, low-profile oil/water cooler AN10 10-row oil/air cooler core Fitting kit containing all necessary nuts, bolts, washers and rubber mounting bobbins The kit for all MQB cars comes supplied with two bracket kits. One kit is for Audi S3 models, the other is for all Golf 7 and other MQB models. Mounting for the bracket set requires drilling bolt holes through the front crash bar.
Racingline

Racingline DQ250 6 Speed DSG Oil Cooler - MQB

Code: VWR D 29G7250
Add Your Review
$1,556.50
Add to Wishlist Add to Compare
Category: A3, Arteon, Audi, Best selling products, Cooling, Drivetrain & Transmission, DSG, Golf, Golf MK7 R, MQB, New products, Octavia, Racingline, S3, Skoda, Skoda, SQ2, Superb, T Roc, Tiguan, TT, TTS, Volkswagen

  • Fast Dispatch on In Stock Items

  • 100% Original & Quality Guarantee

  • Free Customer Support

Racingline Performance DSG Oil Cooler System for MQB DQ250 (6 Speed Only)

Part number: VWR29G7250

It’s not just your engine oil that you need to protect. Your DSG gearbox is susceptible to overheating. And the higher your power, the harder you drive, the more important it is to protect it.

Under hard driving, the factory DSG oil/water cooler is easily overwhelmed. Problems start to occur when oil cannot dissipate its collected heat fast enough and the oil begins to thin and degrade – losing its lubrication properties.

  • When this happens, the DSG will protect itself and begin to lower the torque, increase shift times and in extreme circumstances even loose gear selection.
  • The RacingLine kit solves this problem: by adding in an additional air/oil cooler positioned right in the airflow at the front of the car, oil temperatures are reduced by around 15  – 20   degrees centigrade (of course dependant on how the car is being used, ambient temps and state of tune).
  • The kit uses a clever design which retains the factory oil/water cooling and adds to it with the thermostatically-controlled front-mounted cooler – doubling up your cooling capability when it’s needed with less heat transfer into the water system.
  • Only when the oil exceeds normal temperatures, the thermostat opens. Oil temperature then drops significantly as it is pumped through the densely packed fins of the 10-row cooler’s large surface area mounted right in the cool airflow.

What’s included in the kit

  • Oil cooler mounting brackets
  • AN10 210 series Nylon braided feed and return line
  • Billet CNC thermostatic adaptor block
  • Replacement, low-profile oil/water cooler
  • AN10 10-row oil/air cooler core
  • Fitting kit containing all necessary nuts, bolts, washers and rubber mounting bobbins

The kit for all MQB cars comes supplied with two bracket kits. One kit is for Audi S3 models, the other is for all Golf 7 and other MQB models. Mounting for the bracket set requires drilling bolt holes through the front crash bar.

Racingline Performance DSG Oil Cooler System for MQB DQ250 (6 Speed Only)

Part number: VWR29G7250

It’s not just your engine oil that you need to protect. Your DSG gearbox is susceptible to overheating. And the higher your power, the harder you drive, the more important it is to protect it.

Under hard driving, the factory DSG oil/water cooler is easily overwhelmed. Problems start to occur when oil cannot dissipate its collected heat fast enough and the oil begins to thin and degrade – losing its lubrication properties.
  • When this happens, the DSG will protect itself and begin to lower the torque, increase shift times and in extreme circumstances even loose gear selection.
  • The RacingLine kit solves this problem: by adding in an additional air/oil cooler positioned right in the airflow at the front of the car, oil temperatures are reduced by around 15  – 20   degrees centigrade (of course dependant on how the car is being used, ambient temps and state of tune).
  • The kit uses a clever design which retains the factory oil/water cooling and adds to it with the thermostatically-controlled front-mounted cooler – doubling up your cooling capability when it’s needed with less heat transfer into the water system.
  • Only when the oil exceeds normal temperatures, the thermostat opens. Oil temperature then drops significantly as it is pumped through the densely packed fins of the 10-row cooler’s large surface area mounted right in the cool airflow.

What’s included in the kit

  • Oil cooler mounting brackets
  • AN10 210 series Nylon braided feed and return line
  • Billet CNC thermostatic adaptor block
  • Replacement, low-profile oil/water cooler
  • AN10 10-row oil/air cooler core
  • Fitting kit containing all necessary nuts, bolts, washers and rubber mounting bobbins

The kit for all MQB cars comes supplied with two bracket kits. One kit is for Audi S3 models, the other is for all Golf 7 and other MQB models. Mounting for the bracket set requires drilling bolt holes through the front crash bar.

Euro Kustoms - Shipping, Returns & Refunds Policy

Last updated: 5 October 2025

Business Name: Euro Automotive Group Pty Ltd (trading as Euro Kustoms)
ABN: 98 629 757 035
Business Address: 8 Sir Joseph Banks Street, Botany NSW 2019, Australia
Email: info@eurokustoms.com.au
Phone: (+61) 451 513 339

1. Overview

Euro Kustoms supplies automotive parts and accessories and ships items Australia-wide via third-party courier services. This policy sets out our shipping practices, returns, refunds, warranties, and your rights under the Australian Consumer Law (ACL).

Due to the size, weight, or specialised nature of certain products, freight insurance is not always included. Unless additional insurance is arranged, goods are shipped at the buyer’s risk to the extent permitted by law.

2. Orders, Buyer Responsibilities & Transit Risk

  • Buyers must provide accurate delivery details and a valid contact number at checkout.

  • Items over 25kg or longer than 1 metre cannot be delivered to PO Boxes.

  • Title and risk pass to the buyer upon dispatch, except where ACL applies.

  • All items are inspected and packaged prior to dispatch.

  • Euro Kustoms is not liable for loss or damage in transit unless additional freight insurance has been purchased.

  • Optional freight insurance may be available and must be requested within 24 hours of purchase.

3. Stock Availability & Supply

  • Stock availability is not guaranteed.

  • Some products are custom-made, made-to-order, or imported.

  • Estimated dispatch and delivery times are indicative only and may change without notice.

  • Euro Kustoms is not responsible for delays caused by suppliers, manufacturers, importers, or couriers.

4. Dispatch & Delivery

  • Orders are generally dispatched within 1–5 business days after payment clearance, unless otherwise stated.

  • Delivery timeframes typically range from 7–10 business days, depending on location and courier.

  • Tracking details are supplied for all shipments.

  • Deliveries occur during standard business hours (weekdays only, excluding public holidays).

  • Failed deliveries, incorrect addresses, or incomplete details may result in delays, returns, or redelivery fees.

5. Australian Consumer Law (ACL) Guarantees

Our goods come with guarantees that cannot be excluded under the ACL.

  • For major failures, you are entitled to a refund, replacement, or repair.

  • For minor failures, you are entitled to a repair or replacement.

  • This policy does not limit or exclude any non-excludable rights under ACL.

6. Faulty Goods, Warranty & Damage Claims

  • Claims must be lodged within 7 days of delivery, including order number and supporting evidence.

  • Euro Kustoms may assess the product and/or liaise with the manufacturer or importer.

  • Remedies may include repair, replacement, or refund (refunds are provided only where no other remedy is reasonably available).

Important conditions:

  • Warranty may be void if the product has been modified, altered, incorrectly installed, or tampered with.

  • Euro Kustoms is not liable for labour, diagnostic, fitting, or refitting costs.

  • If customer actions contributed to the issue, remedies may be reduced or refused.

  • Refunds for ACL-approved faults exclude shipping costs unless legally required.

  • If a claim is rejected, the item will be returned at the customer’s cost.

  • Storage fees of 10% of the item value per 14 days may apply after notification.

7. Change-of-Mind Returns (Discretionary)

  • May be considered & determined at Euro Kustoms’ discretion within 7 days of delivery.

  • Items must be unused, unfitted, and returned in original packaging & have a genuine reason for return.

  • A 25% restocking fee applies.

  • All return freight costs are the responsibility of the customer.

  • Refunds are processed within 5–10 business days after inspection.

8. Order Cancellations

  • Orders cancelled after placement but before dispatch or production incur a 25% restocking fee.

  • Orders already dispatched are treated as returns.

9. Freight & Return Shipping Costs

  • Shipping and handling fees are non-refundable.

  • If free shipping was included, return freight is charged at 20% of the item value.

  • Customers are responsible for ensuring returns are adequately packaged, insured, and traceable.

  • Euro Kustoms is not responsible for items lost or damaged during return transit.

10. Non-Returnable & Excluded Items

Returns are not accepted for:

  • Electrical items that have been installed or used.

  • Custom-made, special-order, clearance, or discontinued items.

  • Items marked “non-returnable”.

  • Products damaged through misuse, incorrect installation, or unauthorised modification.

11. Returns Authorisation (RMA) Process

  1. Email info@eurokustoms.com.au with:

    • Order number

    • Item(s) being returned

    • Reason for return (with photos where applicable)

  2. Await written Return Authorisation (RMA) approval and instructions.

  3. Clearly display the RMA number on the package.

  4. Returns without an RMA will be refused.

12. Road-Use & Compliance Disclaimer

Unless expressly stated otherwise, products sold by Euro Kustoms are not certified for legal road use in Australia.

The customer is solely responsible for compliance with applicable laws and regulations. Euro Kustoms accepts no liability for damages or losses, penalties, defects, or enforcement actions arising from the use of non-compliant products.

13. Limitation of Liability

To the maximum extent permitted by law:

  • Euro Kustoms excludes liability for indirect, incidental, or consequential loss, including loss of profit, loss of use, or business interruption.

  • Liability for goods is limited, at Euro Kustoms’ discretion, to repair, replacement, or refund, except where Australian Consumer Law requires otherwise.

14. Force Majeure

Euro Kustoms is not liable for any delay or failure to perform its obligations where such delay or failure is caused by events beyond our reasonable control, including but not limited to supplier delays, manufacturing shortages, shipping congestion, port delays, customs clearance issues, industrial action, natural disasters, acts of government, or failures of courier or logistics providers.

15. Installation Responsibility

Unless expressly stated otherwise, products supplied by Euro Kustoms are intended to be installed by a suitably qualified professional.

Incorrect installation, failure to follow manufacturer instructions, or use outside the intended purpose may void any warranty and limit or exclude available remedies. Euro Kustoms accepts no responsibility for damage, faults, or losses arising from improper installation.

16. Governing Law & Jurisdiction

This policy and any disputes arising from it are governed by the laws of New South Wales, Australia. You agree that the courts of New South Wales have exclusive jurisdiction.

17. Contact Information

For all enquiries relating to shipping, returns, refunds, or warranties:

Email: info@eurokustoms.com.au
Phone: (+61) 451 513 339
Address: 8 Sir Joseph Banks Street, Botany NSW 2019, Australia