Bootmod3 S55 - BMW F8X M2/ M3/ M4 Tune Bootmod3 S55 - BMW F8X M2/ M3/ M4 Tune Bootmod3 Our latest development includes the addition of the bootmod3 CustomROM features that add advanced end user and tuning features such as: Map Switching On-The-Fly using steering wheel cruise control buttons. Flash the vehicle once and have access to 4 switchable maps on the steering wheel changing the calibration entirely from one map slot to the next Flex Fuel Tuning - Tune for any Ethanol blend by having a Flex Fuel sensor report Ethanol % to the engine control unit (DME) and have it manage the tune from regular petrol (0% Ethanol) to 100%, without re-flashing AntiLag - build boost while stationary or rolling by using steering wheel cruise button press and the Accelerator pedal allowing for insta-boost when roll racing or launching New Map Editor - advanced tuning editor with close to 5000 tuning tables available Datalogging of over 80 advanced (RAM) channels and hundreds of others available at highest throughput of any tool available on the market today Ethanol In-Dash Indicator - software changes applied to the DME to allow checking of your Ethanol content as reported by the Flex Fuel Sensor in the vehicle's dash on the RPM gauge (e.g. 2000rpm = 20% ethanol, 5500rpm = 55% ethanol) Build the ultimate tune for your S55 powered vehicle and go from stock to full race calibration, and everywhere in between, with a map switch in the provided mobile app. bootmod3 calibrates the factory vehicle modules over the OBD port in a matter of minutes in the convenience of your driveway or anywhere internet access is available. GTS/CS Transmission Tune Included Stage 1 95: up to 20%HP / 22%TQStage 1 98: up to 22%HP / 23%TQ Stage 2 95: up to 23%HP / 26%TQStage 2 98: up to 24%HP / 26%TQ One OTS map/tune included with the purchase and any other maps labeled as "FREE" GTS/CS Transmission Flash INCLUDED for DCT equipped vehicles Reverting back to stock performance map and re-locking the DME to stock programming Live Dash - realtime vehicle parameter monitoring via in-app gauges Diagnostics Read and clear trouble codes in all vehicle modules Some of the OTS and possible aftermarket turbo upgrade custom map features provided by the bootmod3 platform: Map Customization through Map Editor Exhaust Burble adjustments on any map (OTS & Custom) GTS Startup Roar Max Cooling Mode Cold start (cat heating on startup) removal for quieter cold start Cat efficiency check (CEL) removal for de-cat downpipes (for off-road use) OPF/PPF/GPF Removal Electronic Wastegate (EWG) Disable Custom TMAP Sensor Adjustments Exhaust Flap Adjustments (Sport Mode) Top Speed Limiter Removal Custom High-Pressure Fuel Pump Settings Boost By Gear % Reduction DTC Deactivation Re-calibrated Sport Gauges on iDrive Maps for upgraded turbos E85/blend, RaceGas, and Meth Injection Tuning Custom Throttle Mapping Backend Flash Maps for Piggyback Use S55 engine BMW Vehicles supported: 2014-2020 F80 M3 2014-2020 F82/F83 M4 2018-present F87 M2 Competition Please note vehicles built near to or after 06/2020 + may require an additional bench unlock before the ECU can be flashed with BM3.  VEHICLE MANUFACTURER WARRANTY AND EMISSIONS DISCLAIMER Some items used and/or installed by PRO TUNING FREAKS & Euro Kustoms may void portions of your vehicle’s factory warranty. Some items may not be legal for “public road use”. PRO TUNING FREAKS & Euro Kustoms makes no guarantees to the legality of any parts used for “public road use” and accepts no responsibility for compliance with the vehicle’s factory warranty. 

Bootmod3 S55 - BMW F8X M2/ M3/ M4 Tune

Code: BM3-S55
$962.50 $918.50
Add to Wishlist Add to Compare
  • Fast Dispatch on In Stock Items

  • 100% Original & Quality Guarantee

  • Free Customer Support

Our latest development includes the addition of the bootmod3 CustomROM features that add advanced end user and tuning features such as:

  • Map Switching On-The-Fly using steering wheel cruise control buttons. Flash the vehicle once and have access to 4 switchable maps on the steering wheel changing the calibration entirely from one map slot to the next
  • Flex Fuel Tuning - Tune for any Ethanol blend by having a Flex Fuel sensor report Ethanol % to the engine control unit (DME) and have it manage the tune from regular petrol (0% Ethanol) to 100%, without re-flashing
  • AntiLag - build boost while stationary or rolling by using steering wheel cruise button press and the Accelerator pedal allowing for insta-boost when roll racing or launching
  • New Map Editor - advanced tuning editor with close to 5000 tuning tables available
  • Datalogging of over 80 advanced (RAM) channels and hundreds of others available at highest throughput of any tool available on the market today
  • Ethanol In-Dash Indicator - software changes applied to the DME to allow checking of your Ethanol content as reported by the Flex Fuel Sensor in the vehicle's dash on the RPM gauge (e.g. 2000rpm = 20% ethanol, 5500rpm = 55% ethanol)
  • Build the ultimate tune for your S55 powered vehicle and go from stock to full race calibration, and everywhere in between, with a map switch in the provided mobile app. bootmod3 calibrates the factory vehicle modules over the OBD port in a matter of minutes in the convenience of your driveway or anywhere internet access is available.
  • GTS/CS Transmission Tune Included

Stage 1 95: up to 20%HP / 22%TQ
Stage 1 98: up to 22%HP / 23%TQ


Stage 2 95: up to 23%HP / 26%TQ
Stage 2 98: up to 24%HP / 26%TQ

One OTS map/tune included with the purchase and any other maps labeled as "FREE"

  • GTS/CS Transmission Flash INCLUDED for DCT equipped vehicles
  • Reverting back to stock performance map and re-locking the DME to stock programming
  • Live Dash - realtime vehicle parameter monitoring via in-app gauges
  • Diagnostics
  • Read and clear trouble codes in all vehicle modules

    Some of the OTS and possible aftermarket turbo upgrade custom map features provided by the bootmod3 platform:

    • Map Customization through Map Editor
    • Exhaust Burble adjustments on any map (OTS & Custom)
    • GTS Startup Roar
    • Max Cooling Mode
    • Cold start (cat heating on startup) removal for quieter cold start
    • Cat efficiency check (CEL) removal for de-cat downpipes (for off-road use)
    • OPF/PPF/GPF Removal
    • Electronic Wastegate (EWG) Disable
    • Custom TMAP Sensor Adjustments
    • Exhaust Flap Adjustments (Sport Mode)
    • Top Speed Limiter Removal
    • Custom High-Pressure Fuel Pump Settings
    • Boost By Gear % Reduction
    • DTC Deactivation
    • Re-calibrated Sport Gauges on iDrive
    • Maps for upgraded turbos
    • E85/blend, RaceGas, and Meth Injection Tuning
    • Custom Throttle Mapping
    • Backend Flash Maps for Piggyback Use

    S55 engine BMW Vehicles supported:

    • 2014-2020 F80 M3
    • 2014-2020 F82/F83 M4
    • 2018-present F87 M2 Competition

    Please note vehicles built near to or after 06/2020 + may require an additional bench unlock before the ECU can be flashed with BM3. 

    VEHICLE MANUFACTURER WARRANTY AND EMISSIONS DISCLAIMER

    Some items used and/or installed by PRO TUNING FREAKS & Euro Kustoms may void portions of your vehicle’s factory warranty. Some items may not be legal for “public road use”. PRO TUNING FREAKS & Euro Kustoms makes no guarantees to the legality of any parts used for “public road use” and accepts no responsibility for compliance with the vehicle’s factory warranty. 

    Our latest development includes the addition of the bootmod3 CustomROM features that add advanced end user and tuning features such as:

    • Map Switching On-The-Fly using steering wheel cruise control buttons. Flash the vehicle once and have access to 4 switchable maps on the steering wheel changing the calibration entirely from one map slot to the next
    • Flex Fuel Tuning - Tune for any Ethanol blend by having a Flex Fuel sensor report Ethanol % to the engine control unit (DME) and have it manage the tune from regular petrol (0% Ethanol) to 100%, without re-flashing
    • AntiLag - build boost while stationary or rolling by using steering wheel cruise button press and the Accelerator pedal allowing for insta-boost when roll racing or launching
    • New Map Editor - advanced tuning editor with close to 5000 tuning tables available
    • Datalogging of over 80 advanced (RAM) channels and hundreds of others available at highest throughput of any tool available on the market today
    • Ethanol In-Dash Indicator - software changes applied to the DME to allow checking of your Ethanol content as reported by the Flex Fuel Sensor in the vehicle's dash on the RPM gauge (e.g. 2000rpm = 20% ethanol, 5500rpm = 55% ethanol)
    • Build the ultimate tune for your S55 powered vehicle and go from stock to full race calibration, and everywhere in between, with a map switch in the provided mobile app. bootmod3 calibrates the factory vehicle modules over the OBD port in a matter of minutes in the convenience of your driveway or anywhere internet access is available.
    • GTS/CS Transmission Tune Included

    Stage 1 95: up to 20%HP / 22%TQ
    Stage 1 98: up to 22%HP / 23%TQ


    Stage 2 95: up to 23%HP / 26%TQ
    Stage 2 98: up to 24%HP / 26%TQ

    One OTS map/tune included with the purchase and any other maps labeled as "FREE"

    • GTS/CS Transmission Flash INCLUDED for DCT equipped vehicles
    • Reverting back to stock performance map and re-locking the DME to stock programming
    • Live Dash - realtime vehicle parameter monitoring via in-app gauges
    • Diagnostics
    • Read and clear trouble codes in all vehicle modules

      Some of the OTS and possible aftermarket turbo upgrade custom map features provided by the bootmod3 platform:

      • Map Customization through Map Editor
      • Exhaust Burble adjustments on any map (OTS & Custom)
      • GTS Startup Roar
      • Max Cooling Mode
      • Cold start (cat heating on startup) removal for quieter cold start
      • Cat efficiency check (CEL) removal for de-cat downpipes (for off-road use)
      • OPF/PPF/GPF Removal
      • Electronic Wastegate (EWG) Disable
      • Custom TMAP Sensor Adjustments
      • Exhaust Flap Adjustments (Sport Mode)
      • Top Speed Limiter Removal
      • Custom High-Pressure Fuel Pump Settings
      • Boost By Gear % Reduction
      • DTC Deactivation
      • Re-calibrated Sport Gauges on iDrive
      • Maps for upgraded turbos
      • E85/blend, RaceGas, and Meth Injection Tuning
      • Custom Throttle Mapping
      • Backend Flash Maps for Piggyback Use

      S55 engine BMW Vehicles supported:

      • 2014-2020 F80 M3
      • 2014-2020 F82/F83 M4
      • 2018-present F87 M2 Competition

      Please note vehicles built near to or after 06/2020 + may require an additional bench unlock before the ECU can be flashed with BM3. 

      VEHICLE MANUFACTURER WARRANTY AND EMISSIONS DISCLAIMER

      Some items used and/or installed by PRO TUNING FREAKS & Euro Kustoms may void portions of your vehicle’s factory warranty. Some items may not be legal for “public road use”. PRO TUNING FREAKS & Euro Kustoms makes no guarantees to the legality of any parts used for “public road use” and accepts no responsibility for compliance with the vehicle’s factory warranty. 

      Euro Kustoms - Shipping, Returns & Refunds Policy

      Last updated: 5 October 2025

      Business Name: Euro Automotive Group Pty Ltd (trading as Euro Kustoms)
      ABN: 98 629 757 035
      Business Address: 8 Sir Joseph Banks Street, Botany NSW 2019, Australia
      Email: info@eurokustoms.com.au
      Phone: (+61) 451 513 339


      1. Overview

      Euro Kustoms supplies automotive parts and accessories and ships items Australia-wide via third-party courier services. This policy sets out our shipping practices, returns, refunds, warranties, and your rights under the Australian Consumer Law (ACL).

      Due to the size, weight, or specialised nature of certain products, freight insurance is not always included. Unless additional insurance is arranged, goods are shipped at the buyer’s risk to the extent permitted by law.


      2. Orders, Buyer Responsibilities & Transit Risk

      • Buyers must provide accurate delivery details and a valid contact number at checkout.

      • Items over 25kg or longer than 1 metre cannot be delivered to PO Boxes.

      • Title and risk pass to the buyer upon dispatch, except where ACL applies.

      • All items are inspected and packaged prior to dispatch.

      • Euro Kustoms is not liable for loss or damage in transit unless additional freight insurance has been purchased.

      • Optional freight insurance may be available and must be requested within 24 hours of purchase.


      3. Stock Availability & Supply

      • Stock availability is not guaranteed.

      • Some products are custom-made, made-to-order, or imported.

      • Estimated dispatch and delivery times are indicative only and may change without notice.

      • Euro Kustoms is not responsible for delays caused by suppliers, manufacturers, importers, or couriers.


      4. Dispatch & Delivery

      • Orders are generally dispatched within 1–5 business days after payment clearance, unless otherwise stated.

      • Delivery timeframes typically range from 7–10 business days, depending on location and courier.

      • Tracking details are supplied for all shipments.

      • Deliveries occur during standard business hours (weekdays only, excluding public holidays).

      • Failed deliveries, incorrect addresses, or incomplete details may result in delays, returns, or redelivery fees.


      5. Australian Consumer Law (ACL) Guarantees

      Our goods come with guarantees that cannot be excluded under the ACL.

      • For major failures, you are entitled to a refund, replacement, or repair.

      • For minor failures, you are entitled to a repair or replacement.

      • This policy does not limit or exclude any non-excludable rights under ACL.


      6. Faulty Goods, Warranty & Damage Claims

      • Claims must be lodged within 7 days of delivery, including order number and supporting evidence.

      • Euro Kustoms may assess the product and/or liaise with the manufacturer or importer.

      • Remedies may include repair, replacement, or refund (refunds are provided only where no other remedy is reasonably available).

      Important conditions:

      • Warranty may be void if the product has been modified, altered, incorrectly installed, or tampered with.

      • Euro Kustoms is not liable for labour, diagnostic, fitting, or refitting costs.

      • If customer actions contributed to the issue, remedies may be reduced or refused.

      • Refunds for ACL-approved faults exclude shipping costs unless legally required.

      • If a claim is rejected, the item will be returned at the customer’s cost.

      • Storage fees of 10% of the item value per 14 days may apply after notification.


      7. Change-of-Mind Returns (Discretionary)

      • May be considered & determined at Euro Kustoms’ discretion within 7 days of delivery.

      • Items must be unused, unfitted, and returned in original packaging & have a genuine reason for return.

      • A 25% restocking fee applies.

      • All return freight costs are the responsibility of the customer.

      • Refunds are processed within 5–10 business days after inspection.


      8. Order Cancellations

      • Orders cancelled after placement but before dispatch or production incur a 25% restocking fee.

      • Orders already dispatched are treated as returns.


      9. Freight & Return Shipping Costs

      • Shipping and handling fees are non-refundable.

      • If free shipping was included, return freight is charged at 20% of the item value.

      • Customers are responsible for ensuring returns are adequately packaged, insured, and traceable.

      • Euro Kustoms is not responsible for items lost or damaged during return transit.


      10. Non-Returnable & Excluded Items

      Returns are not accepted for:

      • Electrical items that have been installed or used.

      • Custom-made, special-order, clearance, or discontinued items.

      • Items marked “non-returnable”.

      • Products damaged through misuse, incorrect installation, or unauthorised modification.


      11. Returns Authorisation (RMA) Process

      1. Email info@eurokustoms.com.au with:

        • Order number

        • Item(s) being returned

        • Reason for return (with photos where applicable)

      2. Await written Return Authorisation (RMA) approval and instructions.

      3. Clearly display the RMA number on the package.

      4. Returns without an RMA will be refused.


      12. Road-Use & Compliance Disclaimer

      Unless expressly stated otherwise, products sold by Euro Kustoms are not certified for legal road use in Australia.

      The customer is solely responsible for compliance with applicable laws and regulations. Euro Kustoms accepts no liability for damages or losses, penalties, defects, or enforcement actions arising from the use of non-compliant products.


      13. Limitation of Liability

      To the maximum extent permitted by law:

      • Euro Kustoms excludes liability for indirect, incidental, or consequential loss, including loss of profit, loss of use, or business interruption.

      • Liability for goods is limited, at Euro Kustoms’ discretion, to repair, replacement, or refund, except where Australian Consumer Law requires otherwise.


      14. Force Majeure

      Euro Kustoms is not liable for any delay or failure to perform its obligations where such delay or failure is caused by events beyond our reasonable control, including but not limited to supplier delays, manufacturing shortages, shipping congestion, port delays, customs clearance issues, industrial action, natural disasters, acts of government, or failures of courier or logistics providers.


      15. Installation Responsibility

      Unless expressly stated otherwise, products supplied by Euro Kustoms are intended to be installed by a suitably qualified professional.

      Incorrect installation, failure to follow manufacturer instructions, or use outside the intended purpose may void any warranty and limit or exclude available remedies. Euro Kustoms accepts no responsibility for damage, faults, or losses arising from improper installation.


      16. Governing Law & Jurisdiction

      This policy and any disputes arising from it are governed by the laws of New South Wales, Australia. You agree that the courts of New South Wales have exclusive jurisdiction.


      17. Contact Information

      For all enquiries relating to shipping, returns, refunds, or warranties:

      Email: info@eurokustoms.com.au
      Phone: (+61) 451 513 339
      Address: 8 Sir Joseph Banks Street, Botany NSW 2019, Australia