It wasn’t easy, but it was bound to happen… the professional motorsports pedigree and advanced engineering of PWR, combined with the tier-1 OEM supplier qualifications and global distribution of CSF. After two years of meetings, countless visits by both companies, and endless late-night phone calls and emails to communicate from Los Angeles to Australia, the 1st of what is to be many collaborations is now available.

Introducing the world’s 1st and only high-performance twin intercooler system for the ultra-exclusive Porsche 991 GT2 RS (CSF #8166).

Since the vehicle’s release, the only Porsche 991 GT2 RS intercooler upgrade was not an upgrade, but a band-aid for the stock 1990’s style water spray system which sprays water from a reservoir in the frunk and onto the intercoolers. The band-aid was to install a larger capacity water tank which simply delayed the inevitable running out of water and output to be automatically limited by the factory ECU to try to keep the engine safe. Until you refilled the reservoir again it’s likely your 991 GT2 RS would struggle with charge temps and limited output.

Experts in cooling CSF and PWR have joined operations to deliver a High-Performance Intercooler upgrade for the 991 GT2 RS which eliminates heat soak and lowers charge air temps on stock, tuned, and tracked cars. CSF achieves this by using an F1 performance-grade core which dramatically improves the efficiency of the intercoolers within the same space constraints.

Design & Engineering

Intercooler Core

The OEM tube/fin core contains a single row 7mm tall flat edge tube along with a high-efficiency multi-louvered 7mm tall fin. The CSF/PWR high performance 991 GT2 RS intercooler kit contains a 2-row core featuring 3mm tall rolled tubes with turbulated inner fins manually placed inside each tube to maximize the dissipation of heat from the charge air flowing through the pressure side of the intercooler core. The ambient side 4.85mm tall multi-louvered fin is also the most efficient fin in the high-performance industry globally with performance similar to PWR’s Formula-1 grade race intercooler cores.

• The rolled tube advantage of the CSF/PWR intercooler creates a rounded edge which allows airflow to travel around the tube face and into the intercooler core for maximum airflow and heat dissipation (Compared to the OEM flat face tube which scatters airflow when contacting the tube face).

On the left, a close-up of the CSF/PWR 2-row rolled tube intercooler core. It features turbulated square inner-fins manually inserted into each tube for maximum surface area contact and heat dissipation into the ambient air. This innovative and advanced design equates to the absolute best performance possible by lowering Intake Air Temperatures along with low pressure drop.

On the right is the internal air passage of the OEM cooler – a very good tube with rolled fin design that is hard to match, let alone beat, by other cooling manufacturers.

(PWR is the cooling supplier to Formula-1, NASCAR, WRC, and MotoGP to name a few of the premier racing series their cooling components can be found in. Not to mention the OEM supplier for hypercars, such as the new Ford GT and Porsche 918. PWR is highly regarded in the performance cooling industry and known to be one of the world’s best cooling system manufacturers.)

BBi Autosport has been working on the development of the intercooler system for the GT2 RS. The new system features advanced tube and fin cores, the same as used by motorsport teams and similar to what is found in the “Clubsport” variants of the GT2 RS. This style core has the best properties for taking the heat out of charged air and is incredibly lightweight. The 5-axis machined end tanks guarantee a plug-and-play fit, as a direct upgrade to the factory system.

These intercoolers have undergone rigorous testing through an array of motorsport events as well as hot weather condition testing. The BBi GT2 RS VMax development vehicle has been run through road courses, 1/2 mile races as well as top speed runs – achieving 227mph with the intercoolers handling the heat generated from the upgraded turbochargers. As the vehicle was pushed through the hot canyons of Palm Springs, the performance was not compromised with temperatures kept in control. The GT2 RS now rarely relies on the water injection to keep the intercoolers within the desired range of operation.

Dmitriy Orlov, Head of R&D at BBi Autosport

Hot weather testing in Palm Springs, CA in July 2019 was conducted by BBi Autosport in 111°F (43.89°C) ambient temperatures. Testing results showed, even in these extreme conditions, that Intake Air Temperatures (IATs) never exceeded 125°F (51.67°C) – a delta of approximately 15°F above ambient temperatures. Validating the performance and the ability to eliminate heat soak of the CSF by PWR High-Performance Intercoolers.

CSF #8166

• Eliminates Heat Soak and Lowers Intake Air Temperatures (IATs) for Maximum Performance in Race Conditions
• Formula-1 Performance Grade Core by PWR (2-Row Core Featuring Rolled Tubes w/ Inner Fins)
• CNC Machined Billet End Tanks
• 100% TIG Welded vs. OEM Style Gasket and Crimped End Tanks for Maximum Durability
• OEM Style Inlet/Outlet Connections for Precise Fitment with All OEM Components
• True Plug-and-Play “Drop-in Fit” Installation Requires Absolutely No Modifications (No Need to Trim Expensive OEM Carbon Fiber Air Ducts)
• R&D and Performance Testing by BBi Autosport on their “Project VMAX”
  GT2 RS
• Made in the USA at C&R Racing, a PWR Company

Euro Kustoms - Shipping, Returns & Refunds Policy

Last updated: 5 October 2025

Business Name: Euro Automotive Group Pty Ltd (trading as Euro Kustoms)
ABN: 98 629 757 035
Business Address: 8 Sir Joseph Banks Street, Botany NSW 2019, Australia
Email: info@eurokustoms.com.au
Phone: (+61) 451 513 339

1. Overview

Euro Kustoms supplies automotive parts and accessories and ships items Australia-wide via third-party courier services. This policy sets out our shipping practices, returns, refunds, warranties, and your rights under the Australian Consumer Law (ACL).

Due to the size, weight, or specialised nature of certain products, freight insurance is not always included. Unless additional insurance is arranged, goods are shipped at the buyer’s risk to the extent permitted by law.

2. Orders, Buyer Responsibilities & Transit Risk

• Buyers must provide accurate delivery details and a valid contact number at checkout.

• Items over 25kg or longer than 1 metre cannot be delivered to PO Boxes.

• Title and risk pass to the buyer upon dispatch, except where ACL applies.

• All items are inspected and packaged prior to dispatch.

• Euro Kustoms is not liable for loss or damage in transit unless additional freight insurance has been purchased.

• Optional freight insurance may be available and must be requested within 24 hours of purchase.

3. Stock Availability & Supply

• Stock availability is not guaranteed.

• Some products are custom-made, made-to-order, or imported.

• Estimated dispatch and delivery times are indicative only and may change without notice.

• Euro Kustoms is not responsible for delays caused by suppliers, manufacturers, importers, or couriers.

4. Dispatch & Delivery

• Orders are generally dispatched within 1–5 business days after payment clearance, unless otherwise stated.

• Delivery timeframes typically range from 7–10 business days, depending on location and courier.

• Tracking details are supplied for all shipments.

• Deliveries occur during standard business hours (weekdays only, excluding public holidays).

• Failed deliveries, incorrect addresses, or incomplete details may result in delays, returns, or redelivery fees.

5. Australian Consumer Law (ACL) Guarantees

Our goods come with guarantees that cannot be excluded under the ACL.

• For major failures, you are entitled to a refund, replacement, or repair.

• For minor failures, you are entitled to a repair or replacement.

• This policy does not limit or exclude any non-excludable rights under ACL.

6. Faulty Goods, Warranty & Damage Claims

• Claims must be lodged within 7 days of delivery, including order number and supporting evidence.

• Euro Kustoms may assess the product and/or liaise with the manufacturer or importer.

• Remedies may include repair, replacement, or refund (refunds are provided only where no other remedy is reasonably available).

Important conditions:

• Warranty may be void if the product has been modified, altered, incorrectly installed, or tampered with.

• Euro Kustoms is not liable for labour, diagnostic, fitting, or refitting costs.

• If customer actions contributed to the issue, remedies may be reduced or refused.

• Refunds for ACL-approved faults exclude shipping costs unless legally required.

• If a claim is rejected, the item will be returned at the customer’s cost.

• Storage fees of 10% of the item value per 14 days may apply after notification.

7. Change-of-Mind Returns (Discretionary)

• May be considered & determined at Euro Kustoms’ discretion within 7 days of delivery.

• Items must be unused, unfitted, and returned in original packaging & have a genuine reason for return.

• A 25% restocking fee applies.

• All return freight costs are the responsibility of the customer.

• Refunds are processed within 5–10 business days after inspection.

8. Order Cancellations

• Orders cancelled after placement but before dispatch or production incur a 25% restocking fee.

• Orders already dispatched are treated as returns.

9. Freight & Return Shipping Costs

• Shipping and handling fees are non-refundable.

• If free shipping was included, return freight is charged at 20% of the item value.

• Customers are responsible for ensuring returns are adequately packaged, insured, and traceable.

• Euro Kustoms is not responsible for items lost or damaged during return transit.

10. Non-Returnable & Excluded Items

Returns are not accepted for:

• Electrical items that have been installed or used.

• Custom-made, special-order, clearance, or discontinued items.

• Items marked “non-returnable”.

• Products damaged through misuse, incorrect installation, or unauthorised modification.

11. Returns Authorisation (RMA) Process

1. Email info@eurokustoms.com.au with:

   • Order number

   • Item(s) being returned

   • Reason for return (with photos where applicable)

2. Await written Return Authorisation (RMA) approval and instructions.

3. Clearly display the RMA number on the package.

4. Returns without an RMA will be refused.

12. Road-Use & Compliance Disclaimer

Unless expressly stated otherwise, products sold by Euro Kustoms are not certified for legal road use in Australia.

The customer is solely responsible for compliance with applicable laws and regulations. Euro Kustoms accepts no liability for damages or losses, penalties, defects, or enforcement actions arising from the use of non-compliant products.

13. Limitation of Liability

To the maximum extent permitted by law:

• Euro Kustoms excludes liability for indirect, incidental, or consequential loss, including loss of profit, loss of use, or business interruption.

• Liability for goods is limited, at Euro Kustoms’ discretion, to repair, replacement, or refund, except where Australian Consumer Law requires otherwise.

14. Force Majeure

Euro Kustoms is not liable for any delay or failure to perform its obligations where such delay or failure is caused by events beyond our reasonable control, including but not limited to supplier delays, manufacturing shortages, shipping congestion, port delays, customs clearance issues, industrial action, natural disasters, acts of government, or failures of courier or logistics providers.

15. Installation Responsibility

Unless expressly stated otherwise, products supplied by Euro Kustoms are intended to be installed by a suitably qualified professional.

Incorrect installation, failure to follow manufacturer instructions, or use outside the intended purpose may void any warranty and limit or exclude available remedies. Euro Kustoms accepts no responsibility for damage, faults, or losses arising from improper installation.

16. Governing Law & Jurisdiction

This policy and any disputes arising from it are governed by the laws of New South Wales, Australia. You agree that the courts of New South Wales have exclusive jurisdiction.

17. Contact Information

For all enquiries relating to shipping, returns, refunds, or warranties:

Email: info@eurokustoms.com.au
Phone: (+61) 451 513 339
Address: 8 Sir Joseph Banks Street, Botany NSW 2019, Australia